Kerosene Control Panel


Additional information

The elegant, easy-to-use control panel offers extensive control and monitoring features

Delayed start/stop feature protects the system from accidental starts and stops. The new, LED-illuminated panel can be either flush mounted or bezel mounted while retaining its thermostatic sensing capability.

Control panel properties

Thermostat control
Thermostat adjusts the heater to keep the cabin temperature at a requested level. The thermostat sensor is located in the operating panel, so take this into consideration when choosing the place for installation.

Manual control option
The heater can also be controlled by a simple rheostat in the manual control mode.

Air boost
To enhance cabin drying, the main blower speed can be increased, independent of the heating power setting, by using the air boost function.

Fresh-air ventilation
During warm days it is handy to blow fresh air into the cabin, without heating, by using the Ventilation feature.

Sun switch
The Sun Switch feature reduces energy use by automatically stopping the heater when weather conditions elevate the cabin temperature. The Sun Switch will shut the heater down if cabin temperatures stays more than 7 degrees Celsius above the thermostatic set point for more than 30 minutes.

Accidental start-stop feature
Accidental heater starts or stops are prevented by a two second start/stop button delay.

Flush-mount and bezel-mount options

  • Sample picture of the flush-mounted panel

  • Sample picture of the surface-mounted panel



Wallas reserves rights to make changes or corrections.